Registry

Module Specifications

Archived Version 2016 - 2017

Module Title	Analogue Circuits & Design
Module Code	EE322
School	School of Electronic Engineering
Online Module Resources
Module Co-ordinator	Dr Ronan Scaife	Office Number	S355
NFQ level	8	Credit Rating	5
Pre-requisite	None
Co-requisite	None
Compatibles	None
Incompatibles	None

Description

The aim of this module is to provide the student with an understanding of the operation of various types of transistor and operational amplifier circuitry, to provide the student with the ability to analyse and model various types of analogue circuits and to give the student an introduction to the design of oscillators, filters and other circuits.

Learning Outcomes

1. Analyse the functional operation of simple semiconductor devices such as diodes and BJTs, and investigate their applications in practical circuits.
2. Use bipolar junction transistors (BJTs) in the development of various amplifier circuits.
3. Develop a methodology for analysing the behaviour of transistor and operational amplifier circuits.
4. Design simple circuits such as amplifiers, integrators, oscillators and filters using operational amplifiers.

*Type*	*Hours*	*Description*
Workload	Full-time hours per semester
Lecture	24	No Description
Tutorial	12	No Description
Laboratory	24	No Description
Independent Study	65	No Description
Total Workload: 125

All module information is indicative and subject to change. For further information,students are advised to refer to the University's Marks and Standards and Programme Specific Regulations at: http://www.dcu.ie/registry/examinations/index.shtml

Indicative Content and Learning Activities

Semiconductors & Semiconductor Devices
Review of conduction in semiconductors. The pn-junction. Notation for large-signal and small-signal models. Small-signal models. Review of physics of the bipolar junction transistor. Small-signal parameters of the BJT.

Simple Low Frequency Circuits
Common emitter small-signal model. Common emitter amplifier circuits. Designing to account for variation in component specification. Common base small-signal models. Common base and common collector amplifiers. Common source amplifier. Two stage amplifiers.

High Frequency Effects
The Miller effect applied to CE circuits: frequency response.

Operational Amplifiers
Ideal opamp: differential- and common-mode gains. Common-mode rejection ratio. Differential or emitter-coupled pairs: gains and impedances. Current sources. Implementation in a full differential amplifier.

Applications of Operational Amplifiers
Filters. Inverting amplifier. Non-inverting amplifier. Adder. Subtractor. Integrator. Differentiator. Oscillator.

Assessment Breakdown
Continuous Assessment	25%	Examination Weight	75%

Type	Description	% of total	Assessment Date
Course Work Breakdown

Reassessment Requirement
Resit arrangements are explained by the following categories; 1 = A resit is available for all components of the module 2 = No resit is available for 100% continuous assessment module 3 = No resit is available for the continuous assessment component
Unavailable

Indicative Reading List

R. Boylestad & L. Nashelsky: 2008, Electronic Devices and Circuit Theory, 10 edition, Pearson Education, 0136064639
Allan R. Hambley,: 2007, Electrical Engineering: International Version: Principles and Applications, 4 edition, Pearson Education, 0132066920

Other Resources

None

Programme or List of Programmes

ECE	BEng Electronic & Computer Engineering
ECSA	Study Abroad (Engineering & Computing)
ECSAO	Study Abroad (Engineering & Computing)
EE	BEng in Electronic Engineering
ME	B.Eng. in Mechatronic Engineering

Archives: