Module Title |
Mobile Robotics
|
Module Code |
EE303
|
School |
School of Electronic Engineering
|
Online Module Resources
|
Module Co-ordinator | Dr Sean Marlow | Office Number | S337 |
Level |
3
|
Credit Rating |
5
|
Pre-requisite |
None
|
Co-requisite |
None
|
|
Module Aims
|
The aim of this module is to expose students to the practical engineering tools and techniques involved in developing a complete, functional, microprocessor based system or product. This is achieved via a team-based module, in which eah team must design, construct, demonstrate and document a microprocessor based mobile robot.
|
Learning Outcomes
|
On completion of this module, the student will be able to · Work as a member of a small team, to complete a joint project. [PO5]· Design and construct a suitable hardware configuration, including mechanics, sensors, actuators, handware interfaces and the embedded microprocessor system. [PO1, PO2, PO3, PO5]· Design and construct a suitable, battery based, power supply system. [PO2, PO3, PO5]· Design and code all required control software. [PO2, PO3, PO5]· Integrate, test and debug all components to yield a functional mobile robot. [PO2, PO3, PO5]· Draft an agreed, joint, technical report on the project. [PO6]
|
Indicative Time Allowances
|
|
Hours
|
Lectures |
0
|
Tutorials |
6
|
Laboratories |
36
|
Seminars |
0
|
Independent Learning Time |
33
|
|
|
Total |
75
|
Placements |
|
Assignments |
|
|
NOTE
|
Assume that a 5 credit module load represents approximately 75 hours' work, which includes all teaching, in-course assignments, laboratory work or other specialised training and an estimated private learning time associated with the module.
|
Indicative Syllabus
|
System Analysis and Design: Decomposition into Mechanical, Electrical, Electronic and Software subsystems.Mechanical Prototyping: wheel arrangements; kinematics; prototype construction systems.Software Prototyping: assembly, compilation, linkage, interpretation; cross-development; debug tools and techniques.Power Supply: battery types and characteristics; recharging; voltage regulation; ground return layout, decoupling and isolation.Sensors: hardware and software interfacing; proximity detectors; microswitches; shaft encoders battery level detection.Motors: DC motor chaaracteristics; hardware and software interfacing; Pulse Width Modulation; closed loop control.System Integration: module level test; integration test and debug.Documentation: types, organisation and objectives of documentation; specification and implementation; graphical techniques; computer aided tools.
|
Assessment | Continuous Assessment | 100% | Examination Weight | 0% |
|
Indicative Reading List
|
Mobile Robots: Inspiration to Implementation. Joseph L. Jones, Anita M. Flynn. Massachusetts: A.K. Peters, 1993.
|
Contribution to Programme Areas
Science & Mathematics
|
Discipline - specific Technology
|
Information and Communications Technology
|
Design and Development
|
Engineering Practice
|
Social and Business Context
|
2
|
4
|
3
|
4
|
4
|
2
|
Contribution to Programme Outcomes:
Knowledge and Its Application:
The ability to derive and apply solutions from a knowledge of sciences, engineering sciences, technology and mathematics
|
Problem Solving:
The ability to identify, formulate, analyse and solve engineering problems;
|
Design:
The ability to design a system, component or process to meet specified needs, to design and conduct experiments and to analyse and interpret data;
|
Ethical Practice:
An understanding of the need for high ethical standards in the practice of engineering, including the responsibilities of the engineering profession towards people and the environment
|
Effective Work and Learning:
The ability to work effectively as an individual, in teams and in multidisciplinary settings together with the capacity to undertake lifelong learning;
|
Effective Communication:
The ability to communicate effectively with the engineering community and with society at large
|
3
|
4
|
4
|
2
|
4
|
3
|
Teaching & Learning Strategies/Assessment Methodology:
The aim of this module is to expose students to the practical engineering tools and techniques involved in developing a complete, functional, microprocessor based system or product. This is achieved via a team-based module, in which eah team must design, construct, demonstrate and document a microprocessor based mobile robot. 40% of marks are for a competitive demonstration of robot performance; 60% are for a joint technical report.
|
Programme or List of Programmes
|
BSSA | Study Abroad (DCU Business School) |
BSSAO | Study Abroad (DCU Business School) |
CAM | B.Eng. Mechanical & Manufacturing Eng |
DME | B.Eng. in Digital Media Engineering |
ECSA | Study Abroad (Engineering & Computing) |
ECSAO | Study Abroad (Engineering & Computing) |
EE | BEng in Electronic Engineering |
HMSA | Study Abroad (Humanities & Soc Science) |
HMSAO | Study Abroad (Humanities & Soc Science) |
ME | B.Eng. in Mechatronic Engineering |
SHSA | Study Abroad (Science & Health) |
SHSAO | Study Abroad (Science & Health) |
Archives: | |