Module Title |
Numerical Methods and Finite Element Analysis
|
Module Code |
MM524
|
School |
School of Mechanical and Manufacturing Engineering
|
Online Module Resources
|
Module Co-ordinator | Dr Bryan Mac Donald | Office Number | S380 |
Level |
5
|
Credit Rating |
7.5
|
Pre-requisite |
None
|
Co-requisite |
None
|
|
Module Aims
|
7 To introduce postgraduate engineering students to the application of numerical methods in engineering analysis, particularly the finite element method.
7 To provide the students with practical experience in the use of the finite element method as part of the design cycle.
7 To provide the students with a solid theoretical background to the finite element method.
7 To bring the students to a level that they will be able to apply the finite element method to the solution of engineering problems
|
Learning Outcomes
|
On completion of this module, the student will
7 have an understanding of the various numerical methods used to analyse engineering problems.
7 have a deep and intuitive understanding of the nature and role of the finite element method in the treatment of engineering problems.
7 have an understanding of how computer aided engineering analysis interfaces with and effects the design process.
7 have mastered the necessary skills and knowledge to make effective use of a commercial finite element analysis software package in understanding and solving engineering problems.
|
Indicative Time Allowances
|
|
Hours
|
Lectures |
24
|
Tutorials |
36
|
Laboratories |
0
|
Seminars |
0
|
Independent Learning Time |
52.5
|
|
|
Total |
112.5
|
Placements |
|
Assignments |
|
|
NOTE
|
Assume that a 7.5 credit module load represents approximately 112.5 hours' work, which includes all teaching, in-course assignments, laboratory work or other specialised training and an estimated private learning time associated with the module.
|
Indicative Syllabus
|
Introduction to Numerical Analysis Techniques : FEM, FDM, BEM etc.
Introduction to the finite element method, FEM and the design process, Advantages and Disadvantages
General Concepts of the FEM: Discretization to solution to Postprocessing
Examples of "paper based" FEA :Truss Analysis and Simple two dimensional problems
Computer Implementation of the FEM : Mesh generation, Solution methods, post-processing, validation
Model Building: elements, geometry definition, material definition, boundary conditions
Modelling Techniques: element choice, use of symmetry, mesh design and refinement, model checking etc.
Model validity and accuracy
Results Processing
Analysis Types: Linear and Non-linear, Stress Analysis, Modal Analysis, Thermal and Fluid Analysis
Case Studies: Problem Definition, Finite Element Solution, Results Processing, Experimental Validation
|
Assessment | Continuous Assessment | 50% | Examination Weight | 50% |
|
Indicative Reading List
|
Essential:
1. Finite Element Procedures, Bathe, K.J., Prentice Hall, 1996
2. Finite Element Analysis - Theory and Practice, Fagan, M.J., Longman, 1992
3. Building Better Products with Finite Element Analysis, Adams, V, Onword, 1999
4. Finite Element Analysis - Theory and Practice with ANSYS, Moaveni, S., Prentice Hall, 1999
Supplementary:
1. Introduction to the Finite and Boundary Element Methods for Engineers, Beer, G., Wiley, 1992
2. What Every Engineer Should Know about Finite Element Analysis, Dekker, M. 1988
3. Numerical Methods for Engineers and Scientists, Hoffman, J.D., McGraw-Hill, 1992
|
|
Programme or List of Programmes
|
CAMG | GDip C.A. Mechanical & Manufacturing Eng |
CAMM | MSc. C.A. Mechanical & Manufacturing Eng |
Archives: | |